***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat May 17, 2025 3:18 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
L. Presnall
 Post subject:
PostPosted: Mon Sep 12, 2005 1:19 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Say, does anyone have the side taper profile for the OLF SJ? I have the dread and OM stuff that I've done already, but no SJ...I'd like to make an aluminum flashing or hardboard template, but I want to do it with the right profile! TIA.

_________________
http://www.presnallguitars.com
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Tue Sep 13, 2005 12:03 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
A full scale profile is on the OlF SJ Plan dwg (drawing)....Too many years speaking autocadMichaelP38608.3786226852
Top
 Profile  
 
Tom Dowey
 Post subject:
PostPosted: Tue Sep 13, 2005 1:04 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 19, 2005 10:42 pm
Posts: 316
Location: United States
First name: Tom
Last Name: Dowey
City: Sudbury
State: Massachusetts
Zip/Postal Code: 01776
Country: USA
Michael,
I purchased the OLF SJ Plan and was wondering if there was an electronic copy available?
I don't want to cut up my original.
Top
 Profile  
 
L. Presnall
 Post subject:
PostPosted: Tue Sep 13, 2005 1:19 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Michael, me too! I suppose I could trace it tho....I just figured maybe someone had it loose already...electronic copy would be awesome too tho...

_________________
http://www.presnallguitars.com
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Tue Sep 13, 2005 1:39 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Guys, I hate to be a kermugen. I could provide electronic copies via autocad DWF viewer but you would need a means of printing them on a media 32+" long. I'm guessing that not many of you have that capability. If you do let me know and I will confirm that you bought a copy from the forum and will provide an electronic copy and free-ware software to view and print the drawing via email. Outside of this tracing is probably the best and quickest option or go to your local copiy shop and get a copie run. Any other Ideas?MichaelP38608.4451157407
Top
 Profile  
 
L. Presnall
 Post subject:
PostPosted: Tue Sep 13, 2005 3:50 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Michael, I can view the dwf, but can't print that long (without taping enough 8 1/2 x 11 sheets together)...so I'd have to go to a copy shop to print anyway...so probably the best thing to do in that light is just to copy my plan and cut that one up...thanks tho for the offer to email a file...

_________________
http://www.presnallguitars.com
Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Tue Sep 13, 2005 4:02 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
No problem. That is the issue with most, that being actualy printing the file at full scale. That is the reason Lance and myself desided not to offer the plans in DWF format as an option from the libarary. It would have been convienent if practical though. You could have gotten your plans in min. of paying and had them on electronic storage and no postage. This how I do my custom labels. Small full scale this works fine on any color printer.MichaelP38608.5443171296
Top
 Profile  
 
CarltonM
 Post subject:
PostPosted: Tue Sep 13, 2005 4:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Feb 15, 2005 10:31 am
Posts: 3134
Location: United States
Be sure to compare the copy shop print with the original before you walk out the door! Lay one over the other. Sometimes they don't come out exactly the same size.
Top
 Profile  
 
L. Presnall
 Post subject:
PostPosted: Tue Sep 13, 2005 4:57 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

_________________
http://www.presnallguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com